### Index ###
----
! OWW-OpenWrt

This page is for information on getting oww to work on openwrt.

!! Contributors
[melb_ap]

!! Background
OWW stands for one wire weather and is a weather monitoring system based around the Dallas one-wire protocol and the Dallas example weather station kit available from aag
The oww software allows for remote monitoring of the device over tcp so you can get the wind speed & temp at your poor freezing remote wireless node on the hill !

! OS version used
openwrt RC5 (2.4 kernel)

! Hardware used
wl-500gP with dallas one wire weather station kit and rs232 adaptor
but any ap with 3.3v serial, openwrt support and enough flash space can be used.


! Discussion
Feel free to add your own contributions.

[melb_ap] 8/7/08 : I'm currently working on this project to get the dallas weather sensors running at various node locations.

THE NLSU2 unslung site has the oww software available compiled for openwrt and the wl-500gP but I haven't quite got it to work just yet.

I have a max232 and the dallas rs232 interface connected to the wl-500gP
but running ./owwnogui -i in /opt/bin just hangs the router at present.

I've verified it works ok on a pc with the AAG software which was also handy to get the sensor serials required for oww's devices config.




!! Using this template 
Please select "Edit", copy the source, then paste and modify into your working group page.  Any questions should be directed to the [Webmaster].