home 
wiki
wiki
NodeIBQ
Description:- A D-link AP 2000+ Access point.Location:- On the south side of the Hurstbridge Rd in Diamond Creek facing north.
Objective:- I hope to set up the AP using Cantenna very shortly, people in Diamond Creek will have to point your antenna towards the hill behind Ritchies IGA up near the top and you should be OK.
I will be running a DHCP server with possible broadband access to the internet available.
This Weekend:- I have found this link to assist in getting power over ethernet, which i will build up and test prior to putting my AP up with my cantenna. http://www.nycwireless.net/poe/
I have found that Dick Smith Electronics has the DC plug and socket, and the Middy's in Preston is open on Saturday mornings to by the network sockets.
Checking how far my signal goes:- In my note book I have a Dlink DWL 650+ PCMCIA WiFi NIC, I loaded netstumbler on it from /www.netstumber.com/ and i found that it did not work.
A lot of searching around the net and various forums pointed me to download different types of tools and various utilities, all to no avail.
A person in one forum stated that he had been able to get a DWL 650+ working, but not with the drivers that came on the CD with the NIC.
I went to Dlink's site on the net at www.dlink.com.au and downloaded the latest drivers.
I followed the removal instruction in the PDF in the download and then followed the install instruction and netstumbler now works and displays a wonderful graph.
I will use this tool to check my signal strength, when i place my cantenna on the roof.
Version 8 (old) modified Mon, 26 Jul 2021 12:49:29 +0000 by ozy_23
[EditText] [Spelling] [Current] [Raw] [Code] [Diff] [Subscribe] [VersionHistory] [Revert] [Delete] [RecentChanges]