home 
wiki
wiki
Spelling: NodeILE
[1]
OWNER:
LOCATION: Kallista
STATUS:Testing
New Links being Established
NODE LOG
12/12/04 - (Old Site With many thanks to Peter from NodeGUR [2] and
Mike from NodeHKF [3] who installed 2 Hills 24dB grid antenna and 2
Linksys WRT54GS creating individual links to NodeGUR [4] and NodeFOB
[5]
25/6/05 - The Fernycreek site is all down now & we're in progress of
setting up the new site at Kallista. Expect to have some equipment
running again on 2/7/05.
EQUIPMENT
SERVICES
Planned
- OSPF
- Webcam
- Backbone uplink point
PLANS
New Kallista site :
* Stabilise the link back to GUR & possibly FOB (LOS Permitting at
FOB).
* Setup a waveguide with a 200mw senao AP to enable LOS tests to
this site.
Notes : The view covers from about Mt Waverley to somewhere around
hampton park or south dandenong not sure yet of the bearings.
Checkout Here [6] for LOS checks.
PROBLEMS
Power to the pole is limited by POE.
LEARNINGS
* The DLINK 48v DWL-P200 poe kit transmitter works with the senao
2611 cb3 delux internal POE.
* POE seems to be configured with Positive (+) on Cat5 pins 4/5
(green/greenwhite) and Negative (-) on pins 7&8 (Brown/Brownwhite)
* Most AP's seem to have dioes to protect against power polarity
reversal.
* The Linksys WET11 V1 seems to be only missing two surface mount
diodes to enable it use POE. (Haven't tested)
Links:
------
[1] http://melbournewireless.org.au/nodes/view?id=ILE
[2] http://www.melbournewireless.org.au/?NodeGUR
[3] http://www.melbournewireless.org.au/?NodeHKF
[4] http://www.melbournewireless.org.au/?NodeGUR
[5] http://www.melbournewireless.org.au/?NodeFOB
[6] http://www.nodedb.com/australia/vic/melbourne/view.php?nodeid=757
[EditText] [Spelling] [Current] [Raw] [Code] [Diff] [Subscribe] [VersionHistory] [Revert] [Delete] [RecentChanges]